|
Post by Rich Stone on Sept 23, 2007 16:09:27 GMT
I've had this splitter sat in the shed for months and finally got it out, cleaned it up and fitted it today. I had to respray it as it was a bit scratched but I'm very happy with the result. Now I have to be extra careful getting on and off my driveway... a bit of a drop as the wheels go into the gutter! Rich.
|
|
|
Post by simonrouse12 on Sept 23, 2007 16:13:53 GMT
Looks good are they difficult to fit?
|
|
|
Post by Rich Stone on Sept 23, 2007 17:00:57 GMT
Not at all! There were marks for the holes already on the splitter. I drilled these out with a 6mm drill. I had no fittings with it, so I bought a pack of M6 bolts (the flat head slotted variety). I then jacked up the front of the car so I could work from underneath. I postitioned the splitter and clamped it in place to check it was aligned correctly, then drilled through the splitter holes into the bumper, put the bolts through upwards (6 in all), tightened the nuts up, removed the clamps and hey presto! The whole job took 20 minutes... ;D
Rich.
|
|
|
Post by scubastewart on Sept 23, 2007 17:03:42 GMT
Nice one Rich, I'll be inspecting it to make sure it is perfectly straight!!!
|
|
|
Post by Rich Stone on Sept 23, 2007 17:06:04 GMT
Stewart, You cheeky ***! You know what a perfectionist I am! Rich.
|
|
|
Post by colintf on Sept 23, 2007 17:19:03 GMT
Nice one!
|
|
|
Post by scubastewart on Sept 23, 2007 17:53:04 GMT
Well Rich, you could of course say that the splitter is straight, but the car is wonky!
|
|
boypete
Learning the ropes
Allways learning
Posts: 40
|
Post by boypete on Sept 23, 2007 21:07:11 GMT
I've had this splitter sat in the shed for months and finally got it out, cleaned it up and fitted it today. I had to respray it as it was a bit scratched but I'm very happy with the result. Now I have to be extra careful getting on and off my driveway... a bit of a drop as the wheels go into the gutter! Rich. Looks great! Where'd you get it, and how much?
|
|
|
Post by Rich Stone on Sept 23, 2007 21:12:32 GMT
Fleabay! It's one of the splitters from SS Performance Autostyling aka regbella. He sells them for £40.
Search for item ref 150109757234
Rich.
|
|
m9fdb
Knows stuff!
Posts: 994
|
Post by m9fdb on Sept 23, 2007 22:34:44 GMT
i have a carbon effect one in my garage for sale - got a few little marks but nothing major
cheers
D
|
|
boypete
Learning the ropes
Allways learning
Posts: 40
|
Post by boypete on Sept 24, 2007 18:06:26 GMT
Fleabay! It's one of the splitters from SS Performance Autostyling aka regbella. He sells them for £40. Search for item ref 150109757234 Rich. Thanks for that info Rich
|
|
boypete
Learning the ropes
Allways learning
Posts: 40
|
Post by boypete on Sept 24, 2007 18:09:00 GMT
i have a carbon effect one in my garage for sale - got a few little marks but nothing major cheers D DEF interested! Does it fit as easily as the one Rich bought? PM me? Thanks
|
|
m9fdb
Knows stuff!
Posts: 994
|
Post by m9fdb on Sept 24, 2007 18:20:13 GMT
PM sent
|
|
|
Post by Yigit on Sept 26, 2007 9:04:57 GMT
Looks very good mate. They also work
|
|