thub
Learning the ropes
Posts: 45
|
Post by thub on Sept 19, 2007 20:15:04 GMT
I have a genuine MG windstop removed from my 2000 "F". I would like to fit it to my 2005 (6?) TF. It is one of the last with the glass rear screen. Although I have all the fittings I do not have a template. I know that there is one on a German member's post but would prefer a real life paper one from MG. Does anyone have one that I can beg, borrow,steal or some other way use, please?
|
|
|
|
Post by plrobbo on Sept 24, 2007 23:19:35 GMT
I'm surprised that your 2005 TF didn't come with a windstop as standard? I would suggest that you remove the plastic/speaker shrowd and pick up the anchor points in the cross bar - measure holes to make sure that the windstop you have is the same measurements - then drill through the plastic shroud to meet up with the holes/anchor holes in the cross bar and presto! I take it you haven't got roll hoops? If you have, then you must also alow for these - with some roll hoops you can not use a windstop at all. Cheers.
|
|
