|
|
Post by chromaflair on May 23, 2006 11:50:58 GMT
Hi, has anyone any info on slight ridge that has appeared about 30mm from front edge of my bonnet?.
Its hardly noticable, I have read that it can happen if the bonnet is pushed down hard but I've never had to do that. I'm also sure the catch is aligned correctly. Seems strange it has appeared for no reason, is this a known fault?. I'm sure someone must have info on this.
thanks,
Clive.
|
|
|
|
Post by Nickmgf on May 23, 2006 11:54:41 GMT
I dont have a ridge 30mm up but my paint work has gone yellow ish from the front edge up to about 30mm up the bonnet.
Ive never heard of a ridge before. Seems strange. Is the bonnet stay clipped in correctly?
|
|
|
|
Post by chromaflair on May 23, 2006 12:23:33 GMT
Yes bonnet still opens and closes as normal and stay is clipped in. I've also checked that the catch assembly has not moved. It's not a ridge exactly more like the last 30mm goes at a slightly different angle. It is more noticable from the side of the bonnet.
|
|
|
|
Post by Bruno on May 23, 2006 16:45:22 GMT
Hi Clive,
Every MG has this ridge in the bonnet ! So it's a common "problem"
|
|
|
|
Post by chromaflair on May 23, 2006 21:39:25 GMT
Not sure that they all have one. I did'nt until about 2 weeks ago. Anyone else got one?
|
|
sanders
Learning the ropes
mg_xpower
Posts: 32
|
Post by sanders on May 23, 2006 21:46:02 GMT
I think Bruno means the ridge which goes all the way from the left to the right about 15 (?) mm from the front of the bonnet. About 99% of F's have this. I think you mean something else ?
|
|
|
|
Post by Bruno on May 23, 2006 22:43:41 GMT
yes, thats the one I'm meaning Sander !
|
|
